1. Because the dyed veneer can not be repaired, the defective wood can not be pasted, and even the jumping wire is not good (it is forbidden to underwrite) and the requirements for the butt joints are relatively high.
2. Pay attention to the matching of leather cutting: because the color of each production batch of dyed veneer is biased, the same family and the same model should have the same batch number, otherwise the color bias will be very significant.
3. Because dyed veneer is very easy to fade, it is necessary to pay attention to the use of a release agent or fixing agent before the topcoat in the painting process, which can slow down the fading time and resist yellowing at the bottom of the head.
4. Due to the production and processing of dyeing and color change, it is easy to produce many problems such as dry cracking and color fading in the edge banding process, so it is recommended to use quick-drying high-quality veneer glue to reduce the damage of wood panels as much as possible. When pressing and dyeing veneer, it is necessary to pay attention to the fact that the time should not be too long, and the ambient temperature should not be too high.
